Sweet chocolate orange lotion bars

Today’s DIY project looks and smells so divine it’s almost good enough to eat! Inspired by Terry’s chocolate orange, a classic British confectionery, my mini lotion bars will make the perfect last-minute stocking filler, as well as keeping your hands soft and nourished, which is especially important since many of us will have hours of gift-wrapping fun ahead. (Ahhh, the mere thought of handling endless rolls of wrapping paper and sellotape is making my hands feel dry already!!)

The key ingredients in these lotion bars are beeswaxsweet almond oil and avocado butter:

  • Beeswax keeps the lotion bars solid and acts as a barrier on the skin to help prevent moisture loss.
  • Sweet almond oil is a great emollient.
  • Avocado butter is deeply conditioning.

To re-create the warm, sweet scent of chocolate orange, I’m using cocoa butter and a combination of essential oils (sweet orange, lemon and benzoin). The subtle honey scent from the beeswax also adds to the sweetness.

Argan oil, a thick and non-greasy carrier oil rich in vitamin E and essential fatty acids, is included for added luxury. Natural vitamin E (tocopherol) soothes dry and itchy skin, plus it slows down the oxidation process in the oils (which is what causes rancidity), so I’m using it to help extend the shelf life of my lotion bars.

Finally, some golden mica is added for a hint of shimmer.

Because the lotion bar is solid, you can keep it in a tin and not worry about it squirting out of a tube and making a mess in your pocket or bag by accident!

Ingredients and tools

  • 22.4g beeswax
  • 22.4g sweet almond oil
  • 16g avocado butter
  • 8g cocoa butter
  • 8g argan oil
  • 40 drops (1.6g) natural vitamin E
  • 20 drops (0.8g) sweet orange essential oil
  • 10 drops (0.4g) lemon essential oil
  • a few “blobs” (0.4g) of benzoin
  • a sprinkle of golden-coloured mica
  •  silicone mould (I used a Christmas-tree-shaped ice cube tray!)
  • a heatproof measuring jug
  • a small saucepan
  • a heatproof stirrer

The above will make around 80g worth of lotion bars. If you prefer a harder bar, you can try upping the amount of wax and/or butter slightly, or reducing the amount of oils. The amount of essential oils I have used in this recipe amount to 2% (1.6g) of the combined weight of all the ingredients (80g).


  1. Clean and dry your utensils before starting.
  2. Prepare a double boiler by first filling one-third of a small saucepan with boiling water, and leave it on the stove to simmer.
  3. In a heatproof measuring jug, add in the beeswax. Carefully lower the jug into the saucepan of hot water. The heat from the water will gradually melt the wax.
  4. When the wax has melted, turn off the heat but leave the jug in the saucepan. Add in the cocoa butter and avocado butter, and gently stir until both have also melted.
  5. Now add in the sweet almond and argan oils, and stir (don’t let the mixture harden; if it does, turn the heat up a little for 20 seconds or so).
  6. The mixture should now resemble golden syrup. Take the measuring jug out of the saucepan, wipe its base dry with a towel; let the mixture cool down a little. Keep stirring it though – don’t let it solidify.
  7. Once the mixture has cooled down to the point where you can comfortably wrap your bare hands around the jug, add in the essential oils and vitamin E drops. Stir to mix everything.
  8. For a subtle shimmery effect (it’s Christmas, after all!), sprinkle some golden mica into the mixture and mix thoroughly.
  9. The mixture should begin to thicken now, so now is the time to pour it into the cavities of your mould.
  10. Leave the mould in the fridge to harden for a few hours before popping the lotion bars out.
Quick tips: Don’t rush when pouring the mixture into the mould cavities – you want the mixture to get into all the corners of the cavity. Also, don’t fill right to the top – the bar (when hardened) will bulge otherwise.
They make great stocking fillers!

Alphabet soap

Due to other commitments, I’ve had to put my DIY projects and ideas on the back burner for a while. So imagine how happy I was earlier this week when, for the first time in months, I was able to spare an afternoon for a spot of DIYing! And what better way to celebrate this mini joyous occasion than to make a few soapy gifts for some dear friends, to mark (belatedly) the (infinitely more) joyous occasions of their weddings?


Resembling gummy alphabet sweets, these soap letters look good enough to eat!
Resembling gummy alphabet sweets, these soap letters look good enough to eat!

Ingredients and tools

  • clear SLS-free melt-and-pour soap*
  • white SLS-free melt-and-pour soap*
  • a selection of different-coloured mica
  • essential or fragrant oils of choice (note: the total amount of oils you put in should not be more than 2% of the total weigh of the soap)
  • a silicone alphabet mould
  • a heatproof measuring jug
  • a small saucepan
  • a heatproof stirrer
  • rubbing alcohol


*I’ve not specified how much soap to use as it depends on the size of the letter-shaped cavities in your mould and how many letters you want to make. The cavities in the mould I use have a depth of 2cm, a height of 5cm, and a width of between 1cm to 4cm depending on the letter shape. For my soap letters, a 60g cube of M&P soap base can make  3 to 4 letter ‘halves’ (i.e. one layer), depending again on the shapes of the letters.

Steps (for making two-layer soap letters)

Before you start: If you wish to create soap letters with a white base, remember – the letters in the mould are reversed, so the coloured mixture for the top layer goes into the mould first.

  1. First, decide which colours you would like for which letters. It’s easiest to do all the letters in the same colour first. (Less washing up to do!)
  2. Cut the M&P soap into cubes.
  3. Place the cubes in a heatproof measuring jug and melt in a microwave (in 15-second bursts). Do not boil the soap.
  4. Take the jug out of the microwave, and carefully place it in a saucepan filled one-third with hot water simmering over a stove on low heat.
  5. Gently stir the mixture, taking care to ensure it doesn’t boil or start to bubble (if it does, turn off the heat).
  6. Once the soap base has melted completely, take the measuring jug out of the saucepan and dry its base. Leave to cool for 30 seconds, but keep stirring the mixture so it doesn’t harden.
  7. Once the mixture has cooled down (i.e. the jug is warm but not hot to touch – and the mixture should still be liquid), add in the mica (you only need a tiny pinch each time). Stir to mix everything together, and watch as the mica stains the liquid soap base. Add more mica if you want a more intense colour. Spray a bit of rubbing alcohol into the mixture to stop the mica from clumping together.
  8. Now add in the essential or fragrant oil(s), and give the mixture a final stir.
  9. Carefully but quickly, pour the mixture to fill half of each letter cavity.
  10. Spray rubbing alcohol on top of each soap letter to burst any bubbles forming inside the soap.
  11. As soon as you have completed the first layer of your soap letters, prepare the soap mixture for the second layer (this means repeating steps 3 to 8, but leave out steps 7-8 if you want to keep the second layer white and fragrance-free).
  12. Spray some rubbing alcohol into the half-filled cavities again before filling each one to the top with the second-layer soap mixture. Spray more rubbing alcohol to disperse any air bubbles.
  13. Wait a few hours for the soaps to harden, then you will be able to turn the soaps out of the mould.
  14. Now repeat steps 1 to 13 for your second lot of coloured letters, and so on!
Waiting patiently for my soap letters to harden…
“L is for the way you look at me; O is for the only one I see…”